Search

Guest User

 
Home
  
Information
  
Contact Us
  
Product Catalogue
  
Login
Overview  |  Electrical  |  General  |  Lighting  |  Lofrans  |  Master Winch  |  Plumbing  |  Refrigerators  |  Sealants
Product Links Product Catalogue » Plumbing, Sanitation & Ventilation » Plumbing » #29390 » Specification Information
Product Catalogue
   • Deck Fillers
   • Pipe Fittings
   • Plumbing
   • Valves
   • Ventilation

Latest Products

Description: STAINLESS STEEL CALORIFIER - 22 LITRE


Instructions: [click here for instructions manual]

Description: ECS have been prominent in the Marine Industry for many years and have developed a range of calorifiers to the highest standard. These calorifiers provide the complete domestic hot water systems for on board use whatever the size of craft. They are easily installed with a average heat up time of approx. 20 minutes (a small engine may take longer). The units are fitted with an internal coil or coils which, when connected to the engine jacket water, transfer heat into the calorifier. This heat would otherwise be wasted and therefore makes for hot water system that is both very reliable and economical. Water remains hot whilst the engine is not running to ensure an ample supply.

A calorifier uses the engine heated water to obtain a domestic hot water system on almost any vessel with a water cooled engine. This engine-heated water is passed by way of the top fitting of the primary coil, through the heat exchanger in the Calorifier and returning through the lower fitting to the exhaust mixing chamber. The fresh water is heated and flows to all the hot water taps and shower fittings on the vessel. Dependent, of course, upon the rate at which hot water is drawn off, these Calorifiers will remain hot up to 24 hours after the engine has been switched off. These calorifiers are supplied complete with 1kw immersion, mixer valve, pressure release valve, stainless steel saddle and coil fittings and snap on spigots ready for plastic plumbing. (Speedfit, HEP 2 and Whale.).

These new calorifiers are manufactured to the highest standards with copper insulated cylinder and a highly polished stainless steel outer casing.


Volume Height (mm) Width (mm) Length (mm)
inc Fittings
Weight (kg)
22 350 340 510 9.5



We reserve the right to change all technical data without prior notice.
Contact us by telephone:

Luton (01582) 729721
International +44 1582 729721



Contact us by fax:

Luton (01582) 458893
International +44 1582) 458893



Contact us by snail mail:

E C SMITH & SONS LTD
UNITS H & J
KINGSWAY INDUSTRIAL ESTATE
KINGSWAY
LUTON
BEDFORDSHIRE
LU1 1LP
UK



Contact us by email:

enquiries@ecsmith.com
[ Home Page | Company Profile | Product Catalogue | Trade Enquiry | Contact Us ]

E C Smith & Sons (Marine Factors) Limited
Units H & J, Kingsway I/E, Kingsway, Luton, Bedfordshire LU1 1LP - Registered In England No. 1101047
Site Design © 2007 Binary By Design - Powered By iPage - v6.0