Description: 24V
1000W PROJECT 1000 EVO PLUS 8MM LOW PROFILE
Pricing:
P.O.A
Description: The first PLUG&PLAY windlass in
the world, with integrated radio chain counter Project 1000 evo all the best from Lofrans. Easy
and fast to install, just three cables exiting from the motor, two for the powering of the motor
and one for the controls. Plug-in the waterproof IP68 connector into the EASY BOX, the receiver
unit, and your windlass is operational. Once connected just press the buttons on the radio chain
counter supplied as standard equipment, and you will see it operates. But that is not all. Do you
want to install a further remote control? It is simple. The EASY BOX is supplied with a multi-
connector board, all you have do is just to connect your further remote controls to the Fast-On of
the board. The EASY BOX is able to connect at least three different types of remote controls, all
in parallel. - International patented product
- Top part finishing in chrome plated bronze
or stainless steel 316 (version PLUS)
- Electric motor with high initial starting torque and
faster power down speed (45mt/min)
- Base with stainless steel waterproof bearing
- Base,
drum, gipsy and other hot forged components
- Gearbox of our production with marine corrosion
resistant materials
- Available in the version with drum or low profile
Specification: 1 : Nominal power : 1000 watt 12/24 volt. 2 : Supplied power : 700
Watt (18 min). 3 : Maximum power. : 1850 watt / 1000 watt (11 min) / 1500 watt (1 min). 4 :
Current draw : 70-110 ampere (12V). 5 : Haulage speed : 18-25 mt / 40-60 ampere (24v). 6 :
Max pull : 950 Kg.
Notes on Specification: 1) Nominal power declared by the
manufacturer. 2) Supplied power the motor can supply consecutively for the (S2) operation time,
without gets damaged. * 3) Maximum Power that the motor is able to supply for short
period. 4) The ampere draw is variable according to the load. The declared data regards an
average working condition. 5) Speed increase with decreasing of the lifted load. The declared
data regards an average working condition and might be influenced by several variables (motor
temperature, voltage, bow roller, etc). 6) Maximum traction force on the gipsy measured with a
dynamometer.
* The operation time is called S2 parameter. In estimating the performances of
a electric motor it is necessary to know, together with the declared power also the relative
operation time (S2). Without these important data, it is perfectly useless every comparison on the
lower or higher power among motors.
|
|
|
|
*
All prices are subject to change without prior notice and should be used as a guide only.
|
Other Product Numbers:
|
Contact us by telephone:
Luton (01582) 729721
International +44 1582 729721
Contact us by fax:
Luton (01582) 458893
International +44 1582) 458893
Contact us by snail mail:
E C SMITH & SONS LTD
UNITS H & J
KINGSWAY INDUSTRIAL ESTATE
KINGSWAY
LUTON
BEDFORDSHIRE
LU1 1LP
UK
Contact us by email:
enquiries@ecsmith.com
Viewing page:
Project Evo, 24v
1000w Project 1000 Evo Plus 8mm Low Profile from EC Smith UK Marine Supplier
Key words:
lofrans project evo marine equipment windlass windlasses capstans vertical windlasses horizontal windlasses royal dorado kobra cayman 88 tigres falkon titan a titan b titan c ercole super ercole vertical ercole
|